Identificacion de la placa madre

                                        IDENTIFICACIÓN DE LA PLACA MADRE

INTEGRANTES : 

- CARRASCO MENDO FIORELA ROSMERY
- SUCLUPE NIQUEN IRIS MARIZOL
- PARRA HUANCAS BIANCA ESTHER 

MI PLACA MADRE TIENE LOS SIGUIENTES COMPONENTES : 

                           

 - Stock 478 and FSB533/DDR266 Motherboard
M925ALU V7.3 motherboard is based on the P4M266A/8235 chip set. Supporting Intel Stock 478 processor. Up to 533MHz FSB and DDR 266, it shall deliver you both performance and great value.



- Specification


- CPU Socket 478 for Intel Pentium 4 processor





- FSB 533/400 MHz





- Chipset P4M266A/8235





- VGA Embedded ProSavage8 3D Graphics w/ 32M share memory





- Memory 2 x 184-pin DIMM sockets support two 2.5V DDR SDRAMs (DDR266/200)

- Maximum: 2GB





- Expansion Slots 1 x AGP 4X

- 2 x PCI

- 1  x  CNR





- LAN VIA VT6103 10/100Mbps Fast Ethernet PHY





- Audio VIA VT1612A 2-channel audio Codec

- Compliant with AC97 2.2 specification





- IDE 2 x UltraDMA 133/100/66





- Back Panel I/O Ports 1 x PS/2 keyboard

1 x PS/2 mouse

1 x Parallel Port

1 x Serial Port

1 x VGA port

4 x USB 2.0 Ports

1 x RJ 45 Port

1 x Audio I/O (Line-in, Line-out and Mic-in)





- Internal I/O Connectors & Headers 20-pin ATX power supply connector

4-pin ATX 12V power supply connector

1 x Floppy connector-support 360K~2.88M Byte, 3 Mode FDDs or LS120

1 x IrDA for SIR header

1 x USB header support additional 2 USB2.0 ports

1 x Front panel switch/LED header

1 x CD in header

CPU / SYS FAN headers

1 x Speaker header

1 x Front panel audio header

1 x USB card reader header





- System BIOS AMI 2Mb Flash ROM

- Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI

- Full support for ACPI revision 1.0 specification





Form Factor Micro-ATX form factor, 244x202mm